Skip To Contents

Sign Up
My Page

List of Recent Courses

※ Only active enrolled courses shown.

※ Shows 10 recent courses.

K-MOOC
K-MOOC CB Course

There are no courses currently in progress.

Go to Course Registration →

There are no courses currently in progress.

Go to Course Registration →

Sign Out
한국어
  • 한국어
  • ENGLISH
Discover Courses
Recommended Courses

      마이페이지

      QR코드

      Terms of Use

      Chapter 1 General Rule

      Article 1 (Purpose)

      The purpose of these Terms and Conditions shall be that the customer (hereinafter referred to as "Member") using all member information services (hereinafter referred to as "Service") provided by the K-MOOC (hereinafter referred to as the "Site") operated by the National Institute for Lifelong Education (hereinafter referred to as NILE) and the 'Site' specify the terms and procedures and other necessary matters regarding the use of the 'Services'.

      Article 2 (Effect and Change of Terms)

      1. This Agreement will be effective when the Member clicks the "Agree" button in response to the question "Do you agree with the Terms?"

      2. The 'Site' may change these Terms and Conditions, and the modified Terms will be announced to 'Member's for 7 days prior to the effective date and will be effective on the applicable date'

      3. If 'Member' does not agree to the modified terms, 'Member' may stop using the 'Service' and withdraw. If 'Member' continues to use the 'Services' after the terms have been changed, the 'Member' shall be deemed to have agreed to the terms of this Agreement.

      Article 3 (Regulations other than the Terms and Conditions)

      When any matters not specified in these Terms and Conditions are specified in relevant laws and regulations, they shall be governed by the relevant laws and regulations.

      Chapter 2 Membership sign-up and Service Usage

      Article 4 (Usage Contract)

      Use of the 'Service' is permitted only if the 'homepage' is permitted and the 'Member' agrees to the Terms and Conditions.

      Article 5 (Application for Use)

      1. In order to use this service, you must record your information on the form prescribed by 'this site'.

      2. The user information shown on the subscription form is considered actual data. Users who do not enter real information will not be legally protected.

      Article 6 (Approval of Use Application)

      1. The 'Site' approves the use of 'Service's when 'Member' makes a complete application by writing all matters correctly. However, the following cases are an exception.

      ① If the application is made using someone else's name

      ② If you have filed a false application for the membership application form

      ③ If you applied for the purpose of hindering social well-being, order or morals

      ④ If you interfere with another person's use of the site services or take actions such ass tealing the information

      ⑤ If you do the acts prohibited by laws and regulations and the terms from using the site

      ⑥ If you do not have enough membership requirements set by the site

      2. The information that the member enters is shown below. In addition to the information below, the 'Site' may require the 'Member' to enter additional information.

      - Required items: Email, real name, ID, password, country, gender, year of birth

      - Optional items: Place of residence, the highest level of education, purpose of enrollment

      Article 7 (Change of Contract Items and Information Retention/Use Period)

      1. The 'Member', if changes are made to the information entered when applying for 'Service', must correct it online.

      2. From the moment you register as a 'member', the 'site' can hold and use the information of 'member'.

      3. From the moment the 'Member' leaves the site, the information of the 'Member' will not be available on the site. However, in order to protect personal information, the 'Site' may retain the information of the 'Member' for 20 days from the moment when membership is withdrawn.

      Article 8 (Collection of Personal Information by Cookies)

      1. The 'Site' sends cookies to the user's personal computer to provide specialized services for each user.

      2. In order for the user to be able to use it conveniently with one login, he or she must accept cookies.

      3. Cookies are used to identify the characteristics of users who visit the 'site'.

      4. Users can selectively accept cookies by adjusting options in the web browser. If you refuse to accept cookies, you will not be able to use the services that require log-in.

      Chapter 3 Cancellation of Contract

      Article 9 (Cancellation of Contract)

      1. 'Member' may initiate complaints about the processing of member information through online.

      2. When a 'member' wishes to terminate the service use contract, he or she may request the termination of the contract by e-mail with his or her name, ID, date of birth, or you must apply for withdrawal in 'membership withdrawal' menu of member information correction.

      Article 10 (Disqualification)

      In the event of the following reasons, the 'Site' may cancel the use contract without any prior notice or terminate the service use by determining a period.

      1. If you missed the 'Basic Information' in Article 6 (2)

      2. If you register with false contents when you apply for membership

      3. If you have stolen someone's ID and password

      4. If you infringe the intellectual property rights of the site, other members or third parties

      5. If you do the act of harming social well-being and order, public morals

      6. In the event of an act that damages or causes disadvantage to others' honor

      Chapter 4 Responsibility

      Article 11 (The Obligations of the 'Site')

      1. In order to facilitate the use of the sites affiliated with the 'Site', the 'Site' may share the information of the 'Member' with the affiliated sites, and for the purpose of sharing, the 'Site' can send cookies to the computer of 'Member'.

      2. The 'Site' does not disclose or distribute the personal information of 'Member' which is known by 'Service' provision to a third party without the consent of the user. However, the following exceptions apply.

      ① If there are special regulations in laws such as Act on Financial Real Name Transaction and Confidentiality, Use and Protection of Credit Information, Basic Law of Telecommunications, Telecommunications Business Act, Local Tax Act, Consumer Protection Act, Bank of Korea Act and Criminal Procedure Act

      ② When necessary for statistical writing / academic research or market research, if it is provided in an unidentifiable form for a specific individual

      ③ The 'Site' may use all or part of the information of 'Member' as statistical data related to the business'

      ④ The 'Site' strives to ensure that the 'Service' operates consistently and reliably. If the 'Service' is interrupted for any unavoidable reason, we will do our best to repair and recover it without delay. However, in case of natural disasters, emergencies, periodic system inspections and the necessity of 'NILE', we may stop or suspend the service temporarily.

      Article 12 (Consent on the Use of 'Member' Information)

      1. NILE operates various websites in addition to this site. NILE collects member's information for the purpose of providing services of the main site and various subsites operated by NILE, and can use the collected information of members.

      2. The 'Site' may be affiliated with various education related associations and business operators for the quality of their services and may share their membership information. In such case, the 'Site' shall disclose the partnership, purpose, and contents to the Terms in this Article and shall be provided to the Affiliates after the consent of 'Member' is obtained.'

      3. The consent of the 'Member' under the provisions of this Article shall be effected by clicking the button for subscribing to the information service provided in the Terms and Conditions and the entry screen of member enrollment information.

      Article 13 (Obligations of Member)

      1. 'Member's are responsible for the management of their ID and password.

      2. 'Member' shall not assign, give, loan his or her ID to another person or allow others to use it.

      3. If your ID is used improperly, the 'Member' must notify it to NILE.

      4. "Member" can not use the data registered in the post to conduct sales activities.

      5. 'Member' must receive a notice mail from the "Site".

      Article 14 (Member Posts)

      1. Posts include all writings made by members on the various boards of the 'Site'.

      2. Any loss or problem arising out of the information posted by members and Q&A is solely the responsibility of the member, and the 'site' is not responsible for it unless it is the intention of the 'site'.

      3. In the event of any claims, lawsuits, or any other disputes against the 'site' arising out of any third party due to the member' s posting, the member shall bear the cost of the settlement and process the dispute for the site, In the event that the 'Site' compensates the third party or damages occur to the 'Site', the member shall compensate the 'Site'.

      4. The 'Site' shall delete member's post without prior notice in the event that the post of the 'Member' fall under any of the following: However, the 'site' does not have any obligation to inspect or censor the post.

      ① If you defame a third party by slander

      ② In case of contents that hinder public order or good morals

      ③ In case of infringement of copyright of the 'Site' or copyright of third party etc.

      ④ When the posting period stipulated in the 'Site is exceed

      ⑤ In case of a commercial post, a money-making advertisement, a good luck letter, etc.

      ⑥ In case of not meeting the purpose of site opening

      ⑦ When other applicable laws and regulations are violated

      5. The 'Site' can process, sell, publish, etc. using the posts registered by 'Member's.'

      Chapter 5 Information Provision

      Article 15 (Information Provision)

      The 'Site' may transmit the necessary information or advertisement to 'Member' by e-mail or letter mail. If 'Member' dose not want this, the 'Member' can refuse the information from the subscription application menu and the member information modification menu. However, we may send a notice mail of the 'Site' of Article 13 (5) to the member who has refused to receive the information.

      Chapter 6 Exemption from Responsibility and Indemnification

      Article 16 (Responsibility)

      1. The 'Site' shall not be liable for any damages incurred to the 'Member' in connection with the use of the 'Service' unless there is intent or gross negligence of the 'Site'.

      2. The 'Site' does not endorse or warrant the appropriateness, accuracy, timeliness, credibility of information, products, services, software, graphics, voice and video related to the use of the 'Service'.

      Article 17 (Exemption from Responsibility)

      'NILE' will not be held responsible for any problems occurred to 'Member if disruption of service is due to natural disasters or unavoidable circumstances.

      Article 18 (Competent Court)

      The court shall be the court having jurisdiction over the location of the "NILE" or the court under the civil procedure law of the Republic of Korea.

      The laws of the Republic of Korea shall apply to the interpretation and application of these Terms and the settlement of any dispute relating to these Terms and Conditions.

      Copyright protection policy

      Copyright protection policy

      CCL (Creative Commons License)

      CCL is a free-use license that allows others to use their creations freely under certain conditions.



      Terms and conditions of permission

      Attribution (Author Display)


      It is an essential provision included in the license that the author must be indicated, such as the author's name and source.


      Noncommercial


      The work is not available for profit. It means that in order to use for profit, a separate contract is required.


      No Derivative Works


      It means that it is prohibited to change the work or to produce secondary works using the work.


      Share Alike (Allow to change the same conditions)


      It means that secondary works should be allowed to be produced, but the same license as the original works should be applied to secondary works.



      Terms and conditions of permission




      Author Indication (CC BY)


      You must mark the author's name, title of the work, and source.







      Author Indication-Non-Profit (CC BY-NC)


      If you reveal the author, you can use it freely, but you cannot use it for profit.







      Author Indication-No Change (CC BY-ND)


      If you reveal the author, you can use it freely, but you have to use it as it is without any changes.







      Author Indication-Allow to change the same conditions (CC BY-SA)


      If you reveal the author, you can freely use it and change the work, but the same license as the one applied to the original work should be applied to the secondary work.







      Author Indication-Non-Profit-Allow to change the same conditions (CC BY-NC-SA)


      It can be used if the author is identified, and the work can be changed, but it cannot be used for profit, and the same license as the original work must be applied to the secondary work.







      Author Indication-Non-Profit-No Change (CC BY-NC-ND)


      If you reveal the author, you can use it freely, but it cannot be used for profit and must be used as it is without change.




      Multilingual settings

      Home Courses Engineering Mechanical & Metallurgical Engineering

      Related Series Course
      • [블렌디드러닝] 스마트팩토리 운용을 위한 기초 공학 실습 과정

        이 프로그램은 국내 최초 사이버대학인 서울디지털대학교와 현장 중심 공학교육을 제공하는 동양미래대학교의 컨소시엄으로 운영됩니다. 스마트팩토리로 대표되는 자동화 생산 시스템의 이해와 활용을 위한 기초 이론과 실습을 온·오프라인 블렌디드러닝 형태로 제공하는 최초의 과정이며,​ 온라인에서 이론 학습과 실습 오리엔테이션을 진행한 후, 오프라인에서 실제 실습을 수행하는 온·오프라인 블렌디드러닝 방식으로 운영됩니다. 정해진 절차를 거쳐 수료하면 디지털 배지가 수여됩니다.​

        Total Weeks 28 Courses 4
      Course Introduction

      강좌소개


      ○ 본 강좌는 '[블렌디드러닝] 스마트팩토리 운용을 위한 기초 공학 실습 과정' 구성 강좌 중 전기공압기초 강좌입니다.


      ○ 본 강좌를 수강하고 나면, (전기)공압 시스템의 기본 원리를 이해하고, 이론과 실습을 통해 다양한 산업 현장에서 활용할 수 있도록 하는 기초 기술을 활용하실 수 있습니다.




      학습목표


      ○ 스마트팩토리 분야에 기초가 되는 공학에 대한 실무적 기술(전기공압회로 구성 및 운용, 협동로봇운용, PLC제어회로 구성 및 작동)을 습득하고 활용할 수 있다.



      강좌 운영일정


      ○ 수강신청기간 : 2026년 3월 3일(화) ~ 2026년 8월 21일(금)


      ○ 강좌운영기간 : 2026년 3월 3일(화) ~ 2026년 8월 21일(금)



      이수 및 평가기준


      ○ 이수기준 : 차시별 퀴즈 및 중간평가, 총괄평가 합계 60% 이상 시 이수기준 충족


      ○ 평가기준 : 차시별 퀴즈 20%, 중간평가 30%, 총괄평가(실습보고서) 50%


      ○ 총괄평가(실습보고서) 평가방법 : 오프라인 실습 참여자는 실습 후 작성한 보고서를 8주차에 개별 업로드하고, 제출된 보고서는 담당 교수가 채점표에 따라 평가 및 피드백을 제공함.



      디지털배지


      ○ 디지털배지 :  학습자의 학습 경험과 성과를 기록한 디지털 증명 도구로써 개인의 디지털 지갑에 모아 개인 SNS나 e-포트폴리오, 이력서에 링크 가능



      ○ 신청 및 발급 방법 : K-MOOC 이수자에게 배지 신청 및 발급할 수 있는 링크 발송


      - 디지털배지 신청하는 곳 : 서울디지털대학교 K-MOOC 페이지(https://buly.kr/5q7NMv1)


      - 디지털배지 발급받는 곳 : 한국교육학술정보원(KERIS)의 '맞춤배움길 배움이력 전자지갑' 앱



      ○ 디지털배지 발급 기준 : '[블렌디드러닝] 스마트팩토리 운용을 위한 기초 공학 실습 과정' 프로그램 4개 강좌를 모두 이수하면 디지털배지를 발급합니다. 

      - 관련 강좌


      강좌 1 :  스마트팩토리공학개론


      강좌 2 : [블렌디드러닝]전기공압기초


      강좌 3 : [블렌디드러닝]PLC제어기초


      강좌 4 : [블렌디드러닝]협동로봇기초

      L

      Syllabus

      주차

      주차명(주제)

      차시

      차시명(학습내용)

      평가방법

      1

      공압의 개요

      1-1

      공압 개요

      퀴즈

      - 공압 기술의 정의

      - 공압시스템의 구성요소와 절차

      - 공압시스템의 기호회로도

      1-2

      공기의 성질

      퀴즈

      - 공기압의 장단점

      - 공기의 상태와 습도

      - 공기의 유효단면적과 임계압력비

      1-3

      공압실린더

      퀴즈

      공압실린더의 개요 및 구조, 종류와 특성

      2

      공압밸브의 이해

      2-1

      방향제어밸브

      퀴즈

      - 공압실린더의 제어빙식과 방향제어

      - 방향제어밸브의 종류와 특성

      2-2

      유량제어밸브

      퀴즈

      - 공압실린더의 유량제어

      - 유량제어밸브의 종류와 특성

      2-3

      압력제어밸브

      퀴즈

      압력제어밸브의 종류와 특성

      3

      전기공압의 개요와 구성요소

      3-1

      전기공압 개요

      퀴즈

      - 전기공압의 개요 및 전기공압 시퀀스 제어

      - 전기공압 PLC제어

      3-2

      스위치/릴레이

      퀴즈

      - a접점, b접점, c접점

      - 릴레이, 타이머, 카운터

      3-3

      솔레노이드밸브

      퀴즈

      편솔레노이드밸브, 양솔레노이드밸브

      4

      중간평가(1~3주차, 객관식평가)

      5

      (전기)공압 실습 오리엔테이션

      5-1

      공압실습실 및 실습장비 소개

      퀴즈

      - (전기)공압실습실 소개

      - (전기)공압 실습장비 및 기호

      - 실습실 유의사항

      5-2

      기본 공압 실습요소 소개

      퀴즈

      - 공압실린더

      - 각종제어밸브(압력, 방향, 유량)

      - 공압 기본 회로

      5-3

      전기 공압 실습 요소

      퀴즈

      - 스위치/릴레이

      - 솔레노이드밸브

      - 타이머/카운터

      - 전기공압회로

      6

      기초 공압회로

      실습

      6-1

      단동/복동 실린더 간접제어 실습

      실습보고서

      단동/복동 실린더 간접 제어 회로도 소개 및 실습

      6-2

      자기유지회로 실습

      실습보고서

      - 자기유지회로 소개

      - On 우선/Off 우선 자기유지회로 소개 및 실습

      6-3

      복동실린더 속도제어회로 실습

      실습보고서

      - 미터인/미터아웃 속도제어 소개

      - 복동실린더의 미터아웃 제어 실습

      7

      전기 공압 실습

      7-1

      연속왕복운동회로 실습

      실습보고서

      - 리미트스위치 소개

      - 연속왕복운동회로 소개 및 실습

      7-2

      편솔레노이드밸브 이용

      복동실린더의 연속왕복운동회로 실습

      실습보고서

      - 전기공압실습실 소개

      - 간단한 스위치, 릴레이 활용 시퀀스회로 소개 및 실습

      - 편솔레노이드 활용

      연속왕복운동회로 소개 및 실습

      7-3

      A+B+A-B- 회로 실습(카운터, 타이머 이용)

      실습보고서

      - 간단한 카운터, 타이머 활용

      시퀀스회로 소개 및 실습
      - A+B+A-B- 회로 소개 및 실습

      8

      총괄평가(5~7주차, 실습보고서 제출)

      Preview
      Course Operators

      • ≫ 홍상원 교수

                     [주요경력 및 대외활동]
             현) 동양미래대학교 기계설계공학과 부교수
             현) 정부 법부처 평가위원 후보단
             전) ㈜한화파워시스템 파워시스템사업부 에너지장비사업팀 책임연구원

             [업무 성과]
             CSEP SW 업그레이드 개발
              CSEP SW 개선을 위한 유지/보수
             주문형 압축기의 견적용 성능 검토 Tool 개발
              ASEP SW 개선을 위한 유지/보수

             [저서]
             유공압공학(NCS 교수학습지침서, 2017)
             냉동 및 공기조화(NCS 교수학습지침서, 2018)

      • ≫ 강형민 교수

                     [주요경력 및 대외활동]
             현) 동양미래대학교 기계공학과 부교수
             현) 한국유체기계학회 유체공학일반 편집위원
             전) 한국항공우주연구원 공력성능팀, 선임연구원

             [업무 성과]
                     하이퍼루프 차량 압축기 입구 유로 형상별 유동 해석 (TSDS)
             적합직교분해기법에 의한 Hyperloop 차량 유동 해석의 계산 효율성 향상 연구 - 이공학 개인기초연구지원사업(국가 연구과제)

               [논문 발표]
               - 공력 하중 저감을 위한 고속철도차량 전두부 해치 커버의 최적 설계,
                 한국전산유체공학회지, Vol. 28, No. 3, pp. 109-114, 2023.09.
               -         고속철도차량 개활지 주행 시 공기역학적 불확실성을 고려한 팬터그래프의 접촉력 안정성 분석,
               한국전산유체공학회지, Vol. 27, No. 1, pp. 89-94, 2022
               -         하이퍼루프 차량의 압축기 입구 유로 형상에 따른 유동 해석,
               한국전산유체공학회지, Vol. 27, No. 1, pp. 72-77, 2022.03.

      • ≫  박성현

        담당 튜터(TA)

        mail) thisisparksh@hanmail.net

      FAQ

      Q 강좌 교재가 따로 있나요?

      A 별도의 강좌 교재는 없으며, 매 주차 학습자료(PDF)를 제공하고 있어 다운로드하여 학습하실 수 있습니다.

      Q 강좌 관련하여 질문은 어떻게 하나요?

      A 수업 중 궁금한 것은 담당 튜터(TA) 이메일 또는 Q&A 게시판을 통해 언제든 질문하실 수 있습니다.

      Other / Inquiries
      02-2128-3299

      Field Engineering (Mechanical & Metallurgical Engineering)

      Difficulty intermediate

      Operating Institute SEOUL DIGITAL UNIVERSITY

      Certificate Issuance

      Week 8 Week

      Learning recognition time 32Hour 24Minute (05Hour 21Minute)

      Course Registration Period 26.09.02 ~ 27.02.21

      Course Duration 26.09.02 ~ 27.02.21

      Phone Number 02-2128-3299

      Subtitle language 한국어 Others 1ea

      Course language 한국어(ko)

      Recommended Courses
      Same institution course