Skip To Contents

Sign Up
My Page

List of Recent Courses

※ Only active enrolled courses shown.

※ Shows 10 recent courses.

K-MOOC
K-MOOC CB Course

There are no courses currently in progress.

Go to Course Registration →

There are no courses currently in progress.

Go to Course Registration →

Sign Out
한국어
  • 한국어
  • ENGLISH
Discover Courses
Recommended Courses

      마이페이지

      QR코드

      Terms of Use

      Chapter 1 General Rule

      Article 1 (Purpose)

      The purpose of these Terms and Conditions shall be that the customer (hereinafter referred to as "Member") using all member information services (hereinafter referred to as "Service") provided by the K-MOOC (hereinafter referred to as the "Site") operated by the National Institute for Lifelong Education (hereinafter referred to as NILE) and the 'Site' specify the terms and procedures and other necessary matters regarding the use of the 'Services'.

      Article 2 (Effect and Change of Terms)

      1. This Agreement will be effective when the Member clicks the "Agree" button in response to the question "Do you agree with the Terms?"

      2. The 'Site' may change these Terms and Conditions, and the modified Terms will be announced to 'Member's for 7 days prior to the effective date and will be effective on the applicable date'

      3. If 'Member' does not agree to the modified terms, 'Member' may stop using the 'Service' and withdraw. If 'Member' continues to use the 'Services' after the terms have been changed, the 'Member' shall be deemed to have agreed to the terms of this Agreement.

      Article 3 (Regulations other than the Terms and Conditions)

      When any matters not specified in these Terms and Conditions are specified in relevant laws and regulations, they shall be governed by the relevant laws and regulations.

      Chapter 2 Membership sign-up and Service Usage

      Article 4 (Usage Contract)

      Use of the 'Service' is permitted only if the 'homepage' is permitted and the 'Member' agrees to the Terms and Conditions.

      Article 5 (Application for Use)

      1. In order to use this service, you must record your information on the form prescribed by 'this site'.

      2. The user information shown on the subscription form is considered actual data. Users who do not enter real information will not be legally protected.

      Article 6 (Approval of Use Application)

      1. The 'Site' approves the use of 'Service's when 'Member' makes a complete application by writing all matters correctly. However, the following cases are an exception.

      ① If the application is made using someone else's name

      ② If you have filed a false application for the membership application form

      ③ If you applied for the purpose of hindering social well-being, order or morals

      ④ If you interfere with another person's use of the site services or take actions such ass tealing the information

      ⑤ If you do the acts prohibited by laws and regulations and the terms from using the site

      ⑥ If you do not have enough membership requirements set by the site

      2. The information that the member enters is shown below. In addition to the information below, the 'Site' may require the 'Member' to enter additional information.

      - Required items: Email, real name, ID, password, country, gender, year of birth

      - Optional items: Place of residence, the highest level of education, purpose of enrollment

      Article 7 (Change of Contract Items and Information Retention/Use Period)

      1. The 'Member', if changes are made to the information entered when applying for 'Service', must correct it online.

      2. From the moment you register as a 'member', the 'site' can hold and use the information of 'member'.

      3. From the moment the 'Member' leaves the site, the information of the 'Member' will not be available on the site. However, in order to protect personal information, the 'Site' may retain the information of the 'Member' for 20 days from the moment when membership is withdrawn.

      Article 8 (Collection of Personal Information by Cookies)

      1. The 'Site' sends cookies to the user's personal computer to provide specialized services for each user.

      2. In order for the user to be able to use it conveniently with one login, he or she must accept cookies.

      3. Cookies are used to identify the characteristics of users who visit the 'site'.

      4. Users can selectively accept cookies by adjusting options in the web browser. If you refuse to accept cookies, you will not be able to use the services that require log-in.

      Chapter 3 Cancellation of Contract

      Article 9 (Cancellation of Contract)

      1. 'Member' may initiate complaints about the processing of member information through online.

      2. When a 'member' wishes to terminate the service use contract, he or she may request the termination of the contract by e-mail with his or her name, ID, date of birth, or you must apply for withdrawal in 'membership withdrawal' menu of member information correction.

      Article 10 (Disqualification)

      In the event of the following reasons, the 'Site' may cancel the use contract without any prior notice or terminate the service use by determining a period.

      1. If you missed the 'Basic Information' in Article 6 (2)

      2. If you register with false contents when you apply for membership

      3. If you have stolen someone's ID and password

      4. If you infringe the intellectual property rights of the site, other members or third parties

      5. If you do the act of harming social well-being and order, public morals

      6. In the event of an act that damages or causes disadvantage to others' honor

      Chapter 4 Responsibility

      Article 11 (The Obligations of the 'Site')

      1. In order to facilitate the use of the sites affiliated with the 'Site', the 'Site' may share the information of the 'Member' with the affiliated sites, and for the purpose of sharing, the 'Site' can send cookies to the computer of 'Member'.

      2. The 'Site' does not disclose or distribute the personal information of 'Member' which is known by 'Service' provision to a third party without the consent of the user. However, the following exceptions apply.

      ① If there are special regulations in laws such as Act on Financial Real Name Transaction and Confidentiality, Use and Protection of Credit Information, Basic Law of Telecommunications, Telecommunications Business Act, Local Tax Act, Consumer Protection Act, Bank of Korea Act and Criminal Procedure Act

      ② When necessary for statistical writing / academic research or market research, if it is provided in an unidentifiable form for a specific individual

      ③ The 'Site' may use all or part of the information of 'Member' as statistical data related to the business'

      ④ The 'Site' strives to ensure that the 'Service' operates consistently and reliably. If the 'Service' is interrupted for any unavoidable reason, we will do our best to repair and recover it without delay. However, in case of natural disasters, emergencies, periodic system inspections and the necessity of 'NILE', we may stop or suspend the service temporarily.

      Article 12 (Consent on the Use of 'Member' Information)

      1. NILE operates various websites in addition to this site. NILE collects member's information for the purpose of providing services of the main site and various subsites operated by NILE, and can use the collected information of members.

      2. The 'Site' may be affiliated with various education related associations and business operators for the quality of their services and may share their membership information. In such case, the 'Site' shall disclose the partnership, purpose, and contents to the Terms in this Article and shall be provided to the Affiliates after the consent of 'Member' is obtained.'

      3. The consent of the 'Member' under the provisions of this Article shall be effected by clicking the button for subscribing to the information service provided in the Terms and Conditions and the entry screen of member enrollment information.

      Article 13 (Obligations of Member)

      1. 'Member's are responsible for the management of their ID and password.

      2. 'Member' shall not assign, give, loan his or her ID to another person or allow others to use it.

      3. If your ID is used improperly, the 'Member' must notify it to NILE.

      4. "Member" can not use the data registered in the post to conduct sales activities.

      5. 'Member' must receive a notice mail from the "Site".

      Article 14 (Member Posts)

      1. Posts include all writings made by members on the various boards of the 'Site'.

      2. Any loss or problem arising out of the information posted by members and Q&A is solely the responsibility of the member, and the 'site' is not responsible for it unless it is the intention of the 'site'.

      3. In the event of any claims, lawsuits, or any other disputes against the 'site' arising out of any third party due to the member' s posting, the member shall bear the cost of the settlement and process the dispute for the site, In the event that the 'Site' compensates the third party or damages occur to the 'Site', the member shall compensate the 'Site'.

      4. The 'Site' shall delete member's post without prior notice in the event that the post of the 'Member' fall under any of the following: However, the 'site' does not have any obligation to inspect or censor the post.

      ① If you defame a third party by slander

      ② In case of contents that hinder public order or good morals

      ③ In case of infringement of copyright of the 'Site' or copyright of third party etc.

      ④ When the posting period stipulated in the 'Site is exceed

      ⑤ In case of a commercial post, a money-making advertisement, a good luck letter, etc.

      ⑥ In case of not meeting the purpose of site opening

      ⑦ When other applicable laws and regulations are violated

      5. The 'Site' can process, sell, publish, etc. using the posts registered by 'Member's.'

      Chapter 5 Information Provision

      Article 15 (Information Provision)

      The 'Site' may transmit the necessary information or advertisement to 'Member' by e-mail or letter mail. If 'Member' dose not want this, the 'Member' can refuse the information from the subscription application menu and the member information modification menu. However, we may send a notice mail of the 'Site' of Article 13 (5) to the member who has refused to receive the information.

      Chapter 6 Exemption from Responsibility and Indemnification

      Article 16 (Responsibility)

      1. The 'Site' shall not be liable for any damages incurred to the 'Member' in connection with the use of the 'Service' unless there is intent or gross negligence of the 'Site'.

      2. The 'Site' does not endorse or warrant the appropriateness, accuracy, timeliness, credibility of information, products, services, software, graphics, voice and video related to the use of the 'Service'.

      Article 17 (Exemption from Responsibility)

      'NILE' will not be held responsible for any problems occurred to 'Member if disruption of service is due to natural disasters or unavoidable circumstances.

      Article 18 (Competent Court)

      The court shall be the court having jurisdiction over the location of the "NILE" or the court under the civil procedure law of the Republic of Korea.

      The laws of the Republic of Korea shall apply to the interpretation and application of these Terms and the settlement of any dispute relating to these Terms and Conditions.

      Copyright protection policy

      Copyright protection policy

      CCL (Creative Commons License)

      CCL is a free-use license that allows others to use their creations freely under certain conditions.



      Terms and conditions of permission

      Attribution (Author Display)


      It is an essential provision included in the license that the author must be indicated, such as the author's name and source.


      Noncommercial


      The work is not available for profit. It means that in order to use for profit, a separate contract is required.


      No Derivative Works


      It means that it is prohibited to change the work or to produce secondary works using the work.


      Share Alike (Allow to change the same conditions)


      It means that secondary works should be allowed to be produced, but the same license as the original works should be applied to secondary works.



      Terms and conditions of permission




      Author Indication (CC BY)


      You must mark the author's name, title of the work, and source.







      Author Indication-Non-Profit (CC BY-NC)


      If you reveal the author, you can use it freely, but you cannot use it for profit.







      Author Indication-No Change (CC BY-ND)


      If you reveal the author, you can use it freely, but you have to use it as it is without any changes.







      Author Indication-Allow to change the same conditions (CC BY-SA)


      If you reveal the author, you can freely use it and change the work, but the same license as the one applied to the original work should be applied to the secondary work.







      Author Indication-Non-Profit-Allow to change the same conditions (CC BY-NC-SA)


      It can be used if the author is identified, and the work can be changed, but it cannot be used for profit, and the same license as the original work must be applied to the secondary work.







      Author Indication-Non-Profit-No Change (CC BY-NC-ND)


      If you reveal the author, you can use it freely, but it cannot be used for profit and must be used as it is without change.




      Multilingual settings

      Home Courses Arts & Physical Education Design

      Course Introduction
      수업내용
      유니티 엔진에서 UModelerX 툴을 이용하여 3D 모델링, 레벨디자인, 캐릭터 디자인을 제작하는 수업


      학습목표

      • 유니티 엔진에서 UModelerX 툴을 이용하여 3D 모델링을 하는 방식을 학습하고, 메타버스, 게임, VR, AR 콘텐츠의 기반이 되는 환경 및 캐릭터를 제작하는 기회를 제공하는데 학습의 목표로 함.

      강의계획서

      주차

      주차명

      (주제)

      주차별 학습 목표

      차시

      차시명

      학습내용

      1

      3D 모델링 툴 개요

      UModelerX와 Unity 3D 엔진 소개

      1-1

      UModelerX 소개

      1-2

      UModelerX로 제작한 예시 콘텐츠

      1-3

      Unity 3D 엔진 소개

      1-4

      Unity 3D로 제작한 예시 콘텐츠

      1-5

      Unity Hub 및 엔진 설치

      2

      유니티 3D 엔진 다루기

      유니티 엔진 기본 기능 학습

      2-1

      Unity 레이아웃 및 화면 조작

      2-2

      Unity 3D 오브젝트 생성해보기

      2-3

      Unity Vertex Snapping 기능 이해 및 간단한 모델링

      2-4

      Unity Material 및 Prefab의 이해

      2-5

      Unity 애니메이션의 이해

      3

      3D 모델링을 위한 UModelerX 기본 기능 ①

      UModelerX 기본 기능 학습하기

      3-1

      UModelerX 세팅 학습하기

      3-2

      UModelerX 세팅 실습해보기

      3-3

      UModelerX 기본 레이아웃

      3-4

      UModelerX Element Group

      3-5

      UModelerX Primitive Shapes Group

      4

      3D 모델링을 위한 UModelerX 기본 기능 ②

      UModelerX 기본 기능 학습하기

      4-1

      UModelerX Drawing Group

      4-2

      UModelerX Selection Group

      4-3

      UModelerX Add Group part 1

      4-4

      UModelerX Add Group part 2

      4-5

      UModelerX Remove Group

      5

      3D 모델링을 위한 UModelerX 기본 기능 ③

      UModelerX 기본 기능 학습하기

      5-1

      UModelerX Deform Group

      5-2

      UModelerX Surface Group

      5-3

      UModelerX Misc &Multiple Objects Group

      5-4

      UModelerX Modifier System part 1

      5-5

      UModelerX Modifier System part 2

      6

      3D 배경 및 캐릭터 모델링

      간단한 3D 배경 및 캐릭터 모델링 방법 학습하기

      6-1

      3D 배경 모델링 제작해보기

      6-2

      3D 배경 모델링 제작해보기 2

      6-3

      3D 배경 모델링 제작해보기 3

      6-4

      3D 캐릭터 모델링하기

      6-5

      3D 캐릭터 모델링하기 2

      7

      UV Editor 활용을 통한 텍스쳐 제작

      UV Editor를 이용하여 모델링 꾸미기

      7-1

      UModelerX UV Editor 세팅 및 인터페이스

      7-2

      UModelerX UV Editor Unwrap Group

      7-3

      UModelerX UV Editor Other Groups

      7-4

      UModelerX UV Editor Other Groups 2

      7-5

      UModelerX UV Editor 모델링에 적용 및 내보내기

      8

      중간고사

      중간고사

      8

      중간과제 제작

      UModelerX를 이용한 3D 모델 (배경 및 캐릭터) 제작 및 제출

      9

      Rigging 및 Painting 모드 학습

      Rigging 및 Painting 모드를 이용하여 세부 디자인 제작

      9-1

      UModelerX UV Editor 모델링에 적용 및 내보내기

      9-2

      UModelerX Rigging Mode 알아보기

      9-3

      UModelerX Painting Mode 알아보기

      10

      제페토 스튜디오를 이용한 반팔티 제작 ①

      제페토 아이템 만드는 방법 학습 및 반팔티 모델링

      10-1

      제페토 스튜디오 소개 및 설정하기

      10-2

      반팔티 모델링 제작하기

      10-3

      반팔티 UV Editing

      11

      제페토 스튜디오를 이용한 반팔티 제작 ②

      모델링 리깅 작업 및 페인팅을 통한 반팔티 완성

      11-1

      반팔티 리깅 작업하기

      11-2

      반팔티 리깅 작업하기 실습

      11-3

      반팔티 페인팅하기

      11-4

      반팔티 버텍스 마스킹 및 내보내기

      12

      제페토 스튜디오를 이용한 반바지 제작

      제페토에서 활용 가능한 반바지 아이템 제작

      12-1

      반바지 모델링 제작하기

      12-2

      반바지 리깅 작업하기

      12-3

      반바지 UV 언랩핑하기

      12-4

      반바지 페인팅하기

      12-5

      반바지 버텍스 마스킹 및 내보내기

      13

      제페토 스튜디오를 이용한 신발 제작

      제페토에서 활용 가능한 신발 아이템 제작

      13-1

      제페토 스튜디오 세팅하기

      13-2

      신발 모델링 제작하기

      13-3

      신발 리깅 작업하기

      13-4

      신발 UV 언랩핑하기

      13-5

      신발 페인팅하기

      14

      제페토 스튜디오를 이용한 모자 제작

      제페토에서 활용 가능한 모자 아이템 제작

      14-1

      모자 모델링 제작하기

      14-2

      모자 언랩하기

      14-3

      모자 페인팅하기

      14-4

      오브젝트 활용하기

      14-5

      프로젝트 내보내기 및 가져오기

      15

      수업 종강

      수업 종강, 총정리

      15

      기말고사 제작

      제페토 스튜디오를 이용한 제페토 아이템 제작 및 제출


      강좌수강정보

      이수/평가정보

      출석

      퀴즈

      과제

      중간고사

      기말고사

      20

      -

      -

      20%

      60%

      ※ 총 60% 이상 점수 획득 시, 이수증을 발급받을 수 있습니다.
      출석 (20%) + 중간고사(20%) + 기말고사(60%) 


      Preview
      Course Operators

      • 김현정 교수

        '18 - 현재 : 온체인 대표, (주)애니렉티브 실장

        '22 - 23 : 남서울대학교 가상증강현실학과 겸임교수

                       세명대학교 IoT융합학과 겸임교수

        '23 : 계원예술대학교 디자인혁신융합대학 교수

        메타버스 분야의 특화된 교수


      FAQ

      Q 강좌 교재가 따로 있나요?

      A 아니요. 각 차시마다 PDF로 학습자료를 제공합니다.

      Other / Inquiries
      nondin@kaywon.ac.kr

      Field Arts & Physical Education (Design)

      Difficulty intermediate

      Operating Institute 계원예술대학교

      Certificate Issuance

      Week 15 Week

      Learning recognition time 22Hour 20Minute (17Hour 00Minute)

      Course Registration Period 26.05.25 ~ 26.07.05

      Course Duration 26.06.15 ~ 26.09.27

      Phone Number 0314200698

      Subtitle language 한국어 Others 1ea

      Course language 한국어(ko)

      Recommended Courses
      Same institution course