Learning semiconductor equipments by XR

Chapter 1 General Rule

Article 1 (Purpose)

The purpose of these Terms and Conditions shall be that the customer (hereinafter referred to as "Member") using all member information services (hereinafter referred to as "Service") provided by the K-MOOC (hereinafter referred to as the "Site") operated by the National Institute for Lifelong Education (hereinafter referred to as NILE) and the 'Site' specify the terms and procedures and other necessary matters regarding the use of the 'Services'.

Article 2 (Effect and Change of Terms)

1. This Agreement will be effective when the Member clicks the "Agree" button in response to the question "Do you agree with the Terms?"

2. The 'Site' may change these Terms and Conditions, and the modified Terms will be announced to 'Member's for 7 days prior to the effective date and will be effective on the applicable date'

3. If 'Member' does not agree to the modified terms, 'Member' may stop using the 'Service' and withdraw. If 'Member' continues to use the 'Services' after the terms have been changed, the 'Member' shall be deemed to have agreed to the terms of this Agreement.

Article 3 (Regulations other than the Terms and Conditions)

When any matters not specified in these Terms and Conditions are specified in relevant laws and regulations, they shall be governed by the relevant laws and regulations.

Chapter 2 Membership sign-up and Service Usage

Article 4 (Usage Contract)

Use of the 'Service' is permitted only if the 'homepage' is permitted and the 'Member' agrees to the Terms and Conditions.

Article 5 (Application for Use)

1. In order to use this service, you must record your information on the form prescribed by 'this site'.

2. The user information shown on the subscription form is considered actual data. Users who do not enter real information will not be legally protected.

Article 6 (Approval of Use Application)

1. The 'Site' approves the use of 'Service's when 'Member' makes a complete application by writing all matters correctly. However, the following cases are an exception.

① If the application is made using someone else's name

② If you have filed a false application for the membership application form

③ If you applied for the purpose of hindering social well-being, order or morals

④ If you interfere with another person's use of the site services or take actions such ass tealing the information

⑤ If you do the acts prohibited by laws and regulations and the terms from using the site

⑥ If you do not have enough membership requirements set by the site

2. The information that the member enters is shown below. In addition to the information below, the 'Site' may require the 'Member' to enter additional information.

- Required items: Email, real name, ID, password, country, gender, year of birth

- Optional items: Place of residence, the highest level of education, purpose of enrollment

Article 7 (Change of Contract Items and Information Retention/Use Period)

1. The 'Member', if changes are made to the information entered when applying for 'Service', must correct it online.

2. From the moment you register as a 'member', the 'site' can hold and use the information of 'member'.

3. From the moment the 'Member' leaves the site, the information of the 'Member' will not be available on the site. However, in order to protect personal information, the 'Site' may retain the information of the 'Member' for 20 days from the moment when membership is withdrawn.

Article 8 (Collection of Personal Information by Cookies)

1. The 'Site' sends cookies to the user's personal computer to provide specialized services for each user.

2. In order for the user to be able to use it conveniently with one login, he or she must accept cookies.

3. Cookies are used to identify the characteristics of users who visit the 'site'.

4. Users can selectively accept cookies by adjusting options in the web browser. If you refuse to accept cookies, you will not be able to use the services that require log-in.

Chapter 3 Cancellation of Contract

Article 9 (Cancellation of Contract)

1. 'Member' may initiate complaints about the processing of member information through online.

2. When a 'member' wishes to terminate the service use contract, he or she may request the termination of the contract by e-mail with his or her name, ID, date of birth, or you must apply for withdrawal in 'membership withdrawal' menu of member information correction.

Article 10 (Disqualification)

In the event of the following reasons, the 'Site' may cancel the use contract without any prior notice or terminate the service use by determining a period.

1. If you missed the 'Basic Information' in Article 6 (2)

2. If you register with false contents when you apply for membership

3. If you have stolen someone's ID and password

4. If you infringe the intellectual property rights of the site, other members or third parties

5. If you do the act of harming social well-being and order, public morals

6. In the event of an act that damages or causes disadvantage to others' honor

Chapter 4 Responsibility

Article 11 (The Obligations of the 'Site')

1. In order to facilitate the use of the sites affiliated with the 'Site', the 'Site' may share the information of the 'Member' with the affiliated sites, and for the purpose of sharing, the 'Site' can send cookies to the computer of 'Member'.

2. The 'Site' does not disclose or distribute the personal information of 'Member' which is known by 'Service' provision to a third party without the consent of the user. However, the following exceptions apply.

① If there are special regulations in laws such as Act on Financial Real Name Transaction and Confidentiality, Use and Protection of Credit Information, Basic Law of Telecommunications, Telecommunications Business Act, Local Tax Act, Consumer Protection Act, Bank of Korea Act and Criminal Procedure Act

② When necessary for statistical writing / academic research or market research, if it is provided in an unidentifiable form for a specific individual

③ The 'Site' may use all or part of the information of 'Member' as statistical data related to the business'

④ The 'Site' strives to ensure that the 'Service' operates consistently and reliably. If the 'Service' is interrupted for any unavoidable reason, we will do our best to repair and recover it without delay. However, in case of natural disasters, emergencies, periodic system inspections and the necessity of 'NILE', we may stop or suspend the service temporarily.

Article 12 (Consent on the Use of 'Member' Information)

1. NILE operates various websites in addition to this site. NILE collects member's information for the purpose of providing services of the main site and various subsites operated by NILE, and can use the collected information of members.

2. The 'Site' may be affiliated with various education related associations and business operators for the quality of their services and may share their membership information. In such case, the 'Site' shall disclose the partnership, purpose, and contents to the Terms in this Article and shall be provided to the Affiliates after the consent of 'Member' is obtained.'

3. The consent of the 'Member' under the provisions of this Article shall be effected by clicking the button for subscribing to the information service provided in the Terms and Conditions and the entry screen of member enrollment information.

Article 13 (Obligations of Member)

1. 'Member's are responsible for the management of their ID and password.

2. 'Member' shall not assign, give, loan his or her ID to another person or allow others to use it.

3. If your ID is used improperly, the 'Member' must notify it to NILE.

4. "Member" can not use the data registered in the post to conduct sales activities.

5. 'Member' must receive a notice mail from the "Site".

Article 14 (Member Posts)

1. Posts include all writings made by members on the various boards of the 'Site'.

2. Any loss or problem arising out of the information posted by members and Q&A is solely the responsibility of the member, and the 'site' is not responsible for it unless it is the intention of the 'site'.

3. In the event of any claims, lawsuits, or any other disputes against the 'site' arising out of any third party due to the member' s posting, the member shall bear the cost of the settlement and process the dispute for the site, In the event that the 'Site' compensates the third party or damages occur to the 'Site', the member shall compensate the 'Site'.

4. The 'Site' shall delete member's post without prior notice in the event that the post of the 'Member' fall under any of the following: However, the 'site' does not have any obligation to inspect or censor the post.

① If you defame a third party by slander

② In case of contents that hinder public order or good morals

③ In case of infringement of copyright of the 'Site' or copyright of third party etc.

④ When the posting period stipulated in the 'Site is exceed

⑤ In case of a commercial post, a money-making advertisement, a good luck letter, etc.

⑥ In case of not meeting the purpose of site opening

⑦ When other applicable laws and regulations are violated

5. The 'Site' can process, sell, publish, etc. using the posts registered by 'Member's.'

Chapter 5 Information Provision

Article 15 (Information Provision)

The 'Site' may transmit the necessary information or advertisement to 'Member' by e-mail or letter mail. If 'Member' dose not want this, the 'Member' can refuse the information from the subscription application menu and the member information modification menu. However, we may send a notice mail of the 'Site' of Article 13 (5) to the member who has refused to receive the information.

Chapter 6 Exemption from Responsibility and Indemnification

Article 16 (Responsibility)

1. The 'Site' shall not be liable for any damages incurred to the 'Member' in connection with the use of the 'Service' unless there is intent or gross negligence of the 'Site'.

2. The 'Site' does not endorse or warrant the appropriateness, accuracy, timeliness, credibility of information, products, services, software, graphics, voice and video related to the use of the 'Service'.

Article 17 (Exemption from Responsibility)

'NILE' will not be held responsible for any problems occurred to 'Member if disruption of service is due to natural disasters or unavoidable circumstances.

Article 18 (Competent Court)

The court shall be the court having jurisdiction over the location of the "NILE" or the court under the civil procedure law of the Republic of Korea.

The laws of the Republic of Korea shall apply to the interpretation and application of these Terms and the settlement of any dispute relating to these Terms and Conditions.

Learning semiconductor equipments by XR Ongoing Certificate

#반도체 #반도체장비 #반도체장비실습 #국립군산대 #군산대 #군산대학교
Learning semiconductor equipments by XR
- Field Engineering (Electricity & Electronics)
  
  Operating Institute Operating Institute KUNSAN NATIONAL UNIVERSITY Go to the operating agency Opens new window
  
  Week Week 15 Week
  
  Course Registration Period Course Registration Period 26.05.18 ~ 26.07.26
  
  Phone Number Phone Number 063-469-4824
  
  Course Satisfaction 0.0
- Difficulty Difficulty intermediate
  
  Certificate Certificate Issuance
  
  Learning recognition time Learning recognition time 35Hour 00Minute (35Hour 15Minute)
  
  Course Duration Course Duration 26.06.01 ~ 26.09.13
  
  Subtitle language 한국어 Others 1ea Subtitle language
  
  Course language 한국어(ko)
Registration of courses of interest

List of participating institutions

Course Introduction

- 최근 수요가 급증하고 있는 반도체 제조 분야에 장비를 운영할 인력이 필요하나,

국내에서는 고가의 반도체 장비를 직접 운영해볼 수 있는 교육이 없는 상황입니다.

LAM 등 세계적 기업들은 직원 교육용으로 VR 훈련 시스템을 운영하고 있는 바,

본 강좌에서는 반도체 제조 분야로 입문이나 취업 등을 희망하는 수강생들에게

VR, XR 등으로, 고가의 반도체 장비를 가상 체험 및 실습할 수 있는

실무 교육의 기회를 제공하고자 합니다.

▶ 학습목표

- 인공지능 XR을 활용하여, 반도체 핵심 장비의 이해를 통한 직무능력 배양

▶ 강좌 운영일정

- 수강신청기간 : 2026. 5. 25.(월) ~ 7. 26.(일)

- 강좌운영기간 : 2026. 6. 1.(월) ~ 9. 13.(일) (15주간)

▶ 이수 및 평가기준

Syllabus

주차	주차명(주제)	차시	차시명(학습내용)	평가방법
1	반도체 장비 강의 개요	1-1	반도체 제조 공정 소개	퀴즈(1)
		1-2	반도체 8대공정 장비 소개	퀴즈(1)
		1-3	NCS기반 장비 역량과 일자리 동향	퀴즈(1)
2	반도체 클린룸의 이해 (국립군산대 김용이 교수)	2-1	클린룸의 건축설계	퀴즈(1)
		2-2	클린룸의 열전달 및 공조	퀴즈(1)
		2-3	XR을 이용한 클린룸 특성 체험	퀴즈(1)
3	진공의 기초	3-1	기체 이론	퀴즈(1)
		3-2	진공펌프	퀴즈(1)
		3-3	진공의 측정(전압, 분압)	퀴즈(1)
4	이온주입장비	4-1	SRIM을 이용한 이온주입 이해	퀴즈(1)
		4-2	플라즈마 이온원의 이해	퀴즈(1)
		4-3	자기장에 의한 이온빔 제어	퀴즈(1), 과제(1)
5	건식 증착 장비	5-1	Evaporator	퀴즈(1)
		5-2	Magnetron sputter 원리	퀴즈(1)
		5-3	Magnetron sputter 음극구조	퀴즈(1)
6	반도체 장비 XR체험	6-1	진공장비 CBT/XR 실습	퀴즈(1)
		6-2	식각장비 XR 실습	퀴즈(1)
		6-3	메타버스 XR 컨퍼런스(교수자, 학생)	퀴즈(1)
7	Unreal Engine을 이용한 XR 콘텐츠 제작 (한국공학대 이택희 교수)	7-1	XR 콘텐츠 제작을 위한 Unreal Engine기능	퀴즈(1)
		7-2	오브젝트 상호작용을 위한 BP개발	퀴즈(1)
		7-3	오브젝트 상화작용을 위한 이펙트	퀴즈(1)
8	중간고사	8-1
		8-2
		8-3
9	화학 기상증착장비	9-1	2D-ICP 모델로 보는 PECVD	퀴즈(1)
		9-2	증착 속도 균일도	퀴즈(1)
		9-3	plasma chemistry	퀴즈(1)
10	건식 식각 장비	10-1	플라즈마 발생 원리	퀴즈(1)
		10-2	RF 플라즈마와 식각 표면반응	퀴즈(1)
		10-3	식각 프로파일의 형성	퀴즈(1)
11	포토장비	11-1	트랙장비(PR코팅, 열처리)	퀴즈(1)
		11-2	광학의 기초	퀴즈(1)
		11-3	노광 장비의 이해(스캐너,EUV)	퀴즈(1)
12	분석장비	12-1	현미경(SEM, TEM, AFM)	퀴즈(1)
		12-2	표면분석장비(XPS, AES)	퀴즈(1)
		12-3	전기적 특성 측정기기	퀴즈(1), 과제(1)
13	컴퓨터 시뮬레이션과 디지털 트윈	13-1	물리모델과 수치해석 기법	퀴즈(1)
		13-2	CFD-ACE+ 해석 사례	퀴즈(1)
		13-3	CFD-ACE+와 XR의 결합, 디지털 트윈	퀴즈(1)
14	반도체 장비 산업 전망과 전문가토론	14-1	통계로 본 반도체 장비 산업 전망	퀴즈(1)
		14-2	전문가 인터뷰(1인, AI활용)	퀴즈(1)
		14-3	전문가 토론(장비산업전망, 2인)	퀴즈(1)
15	기말고사

Preview

Course Operators

▶ 현) 국립군산대학교 융합과학공학대학 신소재공학과 교수
▶ (학력) 서울대학교 공과대학 금속공학과 학사·석사·박사
▶ 주요경력
- 한국과학기술연구원 Post-Doc (1990 ~ 1991)
- 금성일렉트론 반도체연구소 선임연구원 (1991 ~ 1992)
- 국립군산대학교 공과대학장 (2021 ~ 2022)
- IBM T.J. Watson Research Center, New York, U.S.A 방문교수 (2005 ~ 2006)
- 서울대학교 공과대학 재료공학부 객원교수 (2012 ~ 2013)
- 한국표면공학회 회장 (2018 ~ 2019)
- 한국진공학회 부회장 (2015 ~ 현재)
- 반도체 장비 개발 과제 연구책임자 (sputter, dry etcher 1993~ 다수)
- ESI consulant(CFD-ACE+개발사 (현)AMAT, 2013~2023)
▶ 현) 국립군산대학교 건축공학부 교수
▶ (학력) 서울대학교 건축학과 공학사, 공학석사, 공학박사
▶ 주요경력
- 국립군산대학교 공학교육혁신센터 센터장 (2013.2. ~ 2015.2.)
- 국립군산대학교 황룡인재교육원 원장 (2020.3. ~ 2021.9.)
- 한국건축친환경설비학회 이사
- (사)한국그린빌딩협의회 학술이사
▶ 현) 한국공학대학교 SW대학 게임공학과 교수
▶ 현) ㈜웨일텍(XR, 디지털 트윈 콘텐츠 제작) 대표
▶ (학력) 서울대학교 공과대학 컴퓨터공학과 학사, 석사, 박사
▶ 주요경력
- 삼성전자 무선사업부 (2009 ~ 2012)
- 이화여자대학교 연구교수 (2012 ~ 2014)
▶ 국립군산대학교 교육혁신처 교수학습지원센터 전임연구원
▶ E-mail: superseop07@kunsan.ac.kr
▶ 국립군산대학교 융합과학공대학 신소재공학전공
▶ E-mail: rlarjsdnb@gmail.com