Making a Factory That Has High Productivity

Chapter 1 General Rule

Article 1 (Purpose)

The purpose of these Terms and Conditions shall be that the customer (hereinafter referred to as "Member") using all member information services (hereinafter referred to as "Service") provided by the K-MOOC (hereinafter referred to as the "Site") operated by the National Institute for Lifelong Education (hereinafter referred to as NILE) and the 'Site' specify the terms and procedures and other necessary matters regarding the use of the 'Services'.

Article 2 (Effect and Change of Terms)

1. This Agreement will be effective when the Member clicks the "Agree" button in response to the question "Do you agree with the Terms?"

2. The 'Site' may change these Terms and Conditions, and the modified Terms will be announced to 'Member's for 7 days prior to the effective date and will be effective on the applicable date'

3. If 'Member' does not agree to the modified terms, 'Member' may stop using the 'Service' and withdraw. If 'Member' continues to use the 'Services' after the terms have been changed, the 'Member' shall be deemed to have agreed to the terms of this Agreement.

Article 3 (Regulations other than the Terms and Conditions)

When any matters not specified in these Terms and Conditions are specified in relevant laws and regulations, they shall be governed by the relevant laws and regulations.

Chapter 2 Membership sign-up and Service Usage

Article 4 (Usage Contract)

Use of the 'Service' is permitted only if the 'homepage' is permitted and the 'Member' agrees to the Terms and Conditions.

Article 5 (Application for Use)

1. In order to use this service, you must record your information on the form prescribed by 'this site'.

2. The user information shown on the subscription form is considered actual data. Users who do not enter real information will not be legally protected.

Article 6 (Approval of Use Application)

1. The 'Site' approves the use of 'Service's when 'Member' makes a complete application by writing all matters correctly. However, the following cases are an exception.

① If the application is made using someone else's name

② If you have filed a false application for the membership application form

③ If you applied for the purpose of hindering social well-being, order or morals

④ If you interfere with another person's use of the site services or take actions such ass tealing the information

⑤ If you do the acts prohibited by laws and regulations and the terms from using the site

⑥ If you do not have enough membership requirements set by the site

2. The information that the member enters is shown below. In addition to the information below, the 'Site' may require the 'Member' to enter additional information.

- Required items: Email, real name, ID, password, country, gender, year of birth

- Optional items: Place of residence, the highest level of education, purpose of enrollment

Article 7 (Change of Contract Items and Information Retention/Use Period)

1. The 'Member', if changes are made to the information entered when applying for 'Service', must correct it online.

2. From the moment you register as a 'member', the 'site' can hold and use the information of 'member'.

3. From the moment the 'Member' leaves the site, the information of the 'Member' will not be available on the site. However, in order to protect personal information, the 'Site' may retain the information of the 'Member' for 20 days from the moment when membership is withdrawn.

Article 8 (Collection of Personal Information by Cookies)

1. The 'Site' sends cookies to the user's personal computer to provide specialized services for each user.

2. In order for the user to be able to use it conveniently with one login, he or she must accept cookies.

3. Cookies are used to identify the characteristics of users who visit the 'site'.

4. Users can selectively accept cookies by adjusting options in the web browser. If you refuse to accept cookies, you will not be able to use the services that require log-in.

Chapter 3 Cancellation of Contract

Article 9 (Cancellation of Contract)

1. 'Member' may initiate complaints about the processing of member information through online.

2. When a 'member' wishes to terminate the service use contract, he or she may request the termination of the contract by e-mail with his or her name, ID, date of birth, or you must apply for withdrawal in 'membership withdrawal' menu of member information correction.

Article 10 (Disqualification)

In the event of the following reasons, the 'Site' may cancel the use contract without any prior notice or terminate the service use by determining a period.

1. If you missed the 'Basic Information' in Article 6 (2)

2. If you register with false contents when you apply for membership

3. If you have stolen someone's ID and password

4. If you infringe the intellectual property rights of the site, other members or third parties

5. If you do the act of harming social well-being and order, public morals

6. In the event of an act that damages or causes disadvantage to others' honor

Chapter 4 Responsibility

Article 11 (The Obligations of the 'Site')

1. In order to facilitate the use of the sites affiliated with the 'Site', the 'Site' may share the information of the 'Member' with the affiliated sites, and for the purpose of sharing, the 'Site' can send cookies to the computer of 'Member'.

2. The 'Site' does not disclose or distribute the personal information of 'Member' which is known by 'Service' provision to a third party without the consent of the user. However, the following exceptions apply.

① If there are special regulations in laws such as Act on Financial Real Name Transaction and Confidentiality, Use and Protection of Credit Information, Basic Law of Telecommunications, Telecommunications Business Act, Local Tax Act, Consumer Protection Act, Bank of Korea Act and Criminal Procedure Act

② When necessary for statistical writing / academic research or market research, if it is provided in an unidentifiable form for a specific individual

③ The 'Site' may use all or part of the information of 'Member' as statistical data related to the business'

④ The 'Site' strives to ensure that the 'Service' operates consistently and reliably. If the 'Service' is interrupted for any unavoidable reason, we will do our best to repair and recover it without delay. However, in case of natural disasters, emergencies, periodic system inspections and the necessity of 'NILE', we may stop or suspend the service temporarily.

Article 12 (Consent on the Use of 'Member' Information)

1. NILE operates various websites in addition to this site. NILE collects member's information for the purpose of providing services of the main site and various subsites operated by NILE, and can use the collected information of members.

2. The 'Site' may be affiliated with various education related associations and business operators for the quality of their services and may share their membership information. In such case, the 'Site' shall disclose the partnership, purpose, and contents to the Terms in this Article and shall be provided to the Affiliates after the consent of 'Member' is obtained.'

3. The consent of the 'Member' under the provisions of this Article shall be effected by clicking the button for subscribing to the information service provided in the Terms and Conditions and the entry screen of member enrollment information.

Article 13 (Obligations of Member)

1. 'Member's are responsible for the management of their ID and password.

2. 'Member' shall not assign, give, loan his or her ID to another person or allow others to use it.

3. If your ID is used improperly, the 'Member' must notify it to NILE.

4. "Member" can not use the data registered in the post to conduct sales activities.

5. 'Member' must receive a notice mail from the "Site".

Article 14 (Member Posts)

1. Posts include all writings made by members on the various boards of the 'Site'.

2. Any loss or problem arising out of the information posted by members and Q&A is solely the responsibility of the member, and the 'site' is not responsible for it unless it is the intention of the 'site'.

3. In the event of any claims, lawsuits, or any other disputes against the 'site' arising out of any third party due to the member' s posting, the member shall bear the cost of the settlement and process the dispute for the site, In the event that the 'Site' compensates the third party or damages occur to the 'Site', the member shall compensate the 'Site'.

4. The 'Site' shall delete member's post without prior notice in the event that the post of the 'Member' fall under any of the following: However, the 'site' does not have any obligation to inspect or censor the post.

① If you defame a third party by slander

② In case of contents that hinder public order or good morals

③ In case of infringement of copyright of the 'Site' or copyright of third party etc.

④ When the posting period stipulated in the 'Site is exceed

⑤ In case of a commercial post, a money-making advertisement, a good luck letter, etc.

⑥ In case of not meeting the purpose of site opening

⑦ When other applicable laws and regulations are violated

5. The 'Site' can process, sell, publish, etc. using the posts registered by 'Member's.'

Chapter 5 Information Provision

Article 15 (Information Provision)

The 'Site' may transmit the necessary information or advertisement to 'Member' by e-mail or letter mail. If 'Member' dose not want this, the 'Member' can refuse the information from the subscription application menu and the member information modification menu. However, we may send a notice mail of the 'Site' of Article 13 (5) to the member who has refused to receive the information.

Chapter 6 Exemption from Responsibility and Indemnification

Article 16 (Responsibility)

1. The 'Site' shall not be liable for any damages incurred to the 'Member' in connection with the use of the 'Service' unless there is intent or gross negligence of the 'Site'.

2. The 'Site' does not endorse or warrant the appropriateness, accuracy, timeliness, credibility of information, products, services, software, graphics, voice and video related to the use of the 'Service'.

Article 17 (Exemption from Responsibility)

'NILE' will not be held responsible for any problems occurred to 'Member if disruption of service is due to natural disasters or unavoidable circumstances.

Article 18 (Competent Court)

The court shall be the court having jurisdiction over the location of the "NILE" or the court under the civil procedure law of the Republic of Korea.

The laws of the Republic of Korea shall apply to the interpretation and application of these Terms and the settlement of any dispute relating to these Terms and Conditions.

Making a Factory That Has High Productivity End(Audience) Certificate
Making a Factory That Has High Productivity
- Field Engineering (Industrial Engineering)
  
  Operating Institute Operating Institute Ulsan College Go to the operating agency Opens new window
  
  Week Week 15 Week
  
  Course Registration Period Course Registration Period 24.02.22 ~ 24.06.14
  
  Phone Number Phone Number 052-230-0878
  
  Course Satisfaction 4.5
- Difficulty Difficulty intermediate
  
  Certificate Certificate Unissued
  
  Learning recognition time Learning recognition time 15Hour 00Minute (06Hour 16Minute)
  
  Course Duration Course Duration 24.03.01 ~ 24.06.21
  
  Subtitle language 한국어 Others 1ea Subtitle language
  
  Course language 한국어(ko)
Registration of courses of interest

List of participating institutions

Course Introduction

강좌 소개

수업내용/목표

본 강의의 목표는 제품을 생산하는 공장의 생산성을높이기위한다양한이론과
적용사례를 다룸으로써 제조기업의 신입사원에서부터 중간관리자와 공장장에
이르기까지 생산성 개선 활동을 추진 할 수 있도록 도움을 주게 될 것입니다.

홍보/예시 영상

강좌 운영 계획

주차	주제	목차	세부내용	학습활동
1주차	기업경영과생산시스템	1차시	기업경영과 생산의역할
		2차시	제조기업의 비즈니스구조
		3차시	생산시스템의개념
		4차시	이상적인 공장의모습	퀴즈
2주차	제품을 생산하는방식	1차시	생산시스템의 운영매커니즘
		2차시	생산방식의구분
		3차시	Job Shop vs Flow Shop
		4차시	Push vs Pull	퀴즈
3주차	생산성개선이란	1차시	개선의필요성
		2차시	개선 활동의마음가짐
		3차시	낭비(Loss)의정의
		4차시	생산 현장의 낭비제거활동	퀴즈
4주차	표준시간의개념	1차시	생산성 개선활동
		2차시	표준시간의개념
		3차시	표준시간의구성
		4차시	표준시간의측정	퀴즈
5주차	작업개선활동	1차시	작업개선의의미
		2차시	동작경제의원칙
		3차시	작업설계 및개선원리	퀴즈
	토론
6주차	공정개선활동	1차시	공정개선의의미
		2차시	공정개선의절차
		3차시	공정개선을 위한체크리스트	퀴즈
	과제
7주차	라인 개선활동	1차시	생산라인의개념
		2차시	라인 작업의효율
		3차시	라인 작업의개선
		4차시	라인 개선의체크리스트	퀴즈
8주차	중간고사
9주차	물류 개선활동	1차시	물류의중요성
		2차시	생산시스템과레이아웃
		3차시	레이아웃 설계방법
		4차시	레이아웃개설/설계사례	퀴즈
10주차	도요타 생산방식과 그시사점	1차시	왜도요타인가?
		2차시	도요타 생산방식의개념
		3차시	도요타 생산방식의철학	퀴즈
	토론
11주차	생산환경의변화와 제조업의대응	1차시	생산환경의변화
		2차시	제조업의움직임
		3차시	생산방식의 진화방향	퀴즈
	과제
12주차	생산방식의 진화와생산전략	1차시	생산방식의 진화방향
12주차	생산방식의 진화와생산전략	2차시	생산전략 수립방법론	퀴즈
13주차	4차 산업혁명 시대의제조업	1차시	제조업의 위기상황
		2차시	위기 돌파를 위한움직임
		3차시	제조업의 변화방향	퀴즈
14주차	스마트 팩토리와제조혁신	1차시	스마트팩토리의개념
		2차시	제조혁신추진전략
		3차시	스마트팩토리 구축사례
		4차시	강의마무리	퀴즈
15주차	기말고사

강좌운영팀 소개

교수자

김기범 교수: 현) 울산과학대학교 스마트제조공학과 교수; 2008~2019 LG생산기술원 제조혁신 추진팀; 2017~2019 대한산업공학회 산업공학회지 논문편집위원; 연세대학교 정보산업공학 박사; E-mail: kbkim@uc.ac.kr

강좌지원팀

남정훈: 울산과학대학교 교수학습지원센터 연구원; E-mail: jhnam2@uc.ac.kr

강좌 수강 정보

이수/평가정보

이수/평가정보
과제명	퀴즈	과제	중간고사	기말고사
반영비율	20%	20%	30%	30%

※ 총 60% 이상 점수 획득 시, 이수증을 발급받을 수 있습니다.

강좌 수준 및 선수요건

퀴즈, 과제, 중간, 기말고사에서 얻은 점수의 합이 전체 100%
중 60% 이상인 수강생들에게 이수증을 발급함. 단, 반드시 중
간, 기말고사에 응시해야 하며, 과제물을 제출해야 함
(모든 학습의 동영상을 시청하여야 함)

교재 및 참고문헌

참고자료는 동영상 아래 강의교안을 다운받아주세요.

자주 묻는 질문

궁금한 질문은 어디서 하나요?

1주차에 마련되어있는 소통창구를 이용해주세요

Field Engineering (Industrial Engineering)

Difficulty Difficulty intermediate

Operating Institute Ulsan College Go to the operating agencyOpens new window

Certificate Certificate Unissued

Week Week 15 Week

Learning recognition time Learning recognition time 15Hour 00Minute (06Hour 16Minute)

Course Registration Period Course Registration Period 24.02.22 ~ 24.06.14

Course Duration Course Duration 24.03.01 ~ 24.06.21

Phone Number Phone Number 052-230-0878

Subtitle language 한국어 Others 1ea Subtitle language

Course language 한국어(ko)

Registration of courses of interest